The objective of this work was to design, construct and test an electronic
instrumentation acquisition and storage of data, regarding the performance of the
agricultural tractors during operations to field. Was realized the design informational,
conceptual, preliminary and detailed of the instrumentation to be built, looking to the
installation of sensor for measure of the speed of the drive wheels and speed of the
tractor, flow meter for determination of the consumption of fuel and a load cell for
measure of the traction force. All the instrumentation was installed was set up in a
tractor Massey Ferguson model Advanced 290 Shuttle with front wheel drive, and the
values obtained by the electronic equipments that constitute the system of sensor are
driven a system of storage of data based on a datalogger. Later those data were
collected through the software PC200W®, who it s characterized by being base
software that there is a programming developed exclusively for this work. This tractor
was submitted to field tests, where it was possible to verify the operation and the
quality of the obtained data. The data considered rude, because they are present in
the text, we need to transfer they to an electronic spreadsheet of Microsoft Excel® for
us to be later organized, interpreted in a clear and objective way. At the end of this
work, it is ended that is possible to determine the performance of the agricultural
tractors through an electronic instrumentation, obtaining data that represent the
conditions of the test in that the tractor was submitted. / Este trabalho teve por objetivo projetar, construir e testar uma instrumentação
eletrônica para aquisição e armazenamento de dados, referentes ao desempenho de
tratores agrícolas durante operações a campo. Foi realizado o projeto informacional,
conceitual, preliminar e detalhado da instrumentação a ser construída visando à
instalação de sensores para medida da velocidade das rodas motrizes e velocidade
do trator, fluxômetro para determinação do consumo de combustível e uma célula de
carga para medida da força de tração. Toda a instrumentação foi montada em um
trator Massey Ferguson modelo Advanced 290 Shuttle com tração dianteira auxiliar,
e os valores obtidos pelos equipamentos eletrônicos que constituem o sistema de
sensores, são conduzidos a um sistema de armazenamento de dados baseado em
um datalogger. Posteriormente esses dados são coletados através do software
PC200W®, que se caracteriza por ser um software de base que possui uma
programação desenvolvida exclusivamente para este fim. Este trator foi submetido a
testes de campo, onde foi possível verificar o funcionamento e a qualidade dos
dados obtidos. Os dados considerados brutos, por se apresentarem na forma de
texto, são transferidos a uma planilha eletrônica do Microsoft Excel® para serem
posteriormente organizados e interpretados de forma clara e objetiva. Ao final deste
trabalho, conclui-se que é possível determinar o desempenho dos tratores agrícolas
através de uma instrumentação eletrônica, obtendo dados que representam as
condições do teste em que o trator foi submetido.
Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufsm.br:1/7509 |
Date | 09 January 2009 |
Creators | Russini, Alexandre |
Contributors | Schlosser, José Fernando, Romano, Leonardo Nabaes, Boller, Walter |
Publisher | Universidade Federal de Santa Maria, Programa de Pós-Graduação em Engenharia Agrícola, UFSM, BR, Engenharia Agrícola |
Source Sets | IBICT Brazilian ETDs |
Language | Portuguese |
Detected Language | English |
Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
Format | application/pdf |
Source | reponame:Repositório Institucional da UFSM, instname:Universidade Federal de Santa Maria, instacron:UFSM |
Rights | info:eu-repo/semantics/openAccess |
Relation | 500300000008, 400, 500, 500, 500, 500, 66609d8a-30dd-463d-9687-a65af74130cb, 27df2cf1-1614-41d9-810a-4a0f38bb5894, 5d68eac2-00c3-4bee-a734-47b48eeae41c, 653b37f1-7803-44ee-b6b4-2d3a098e11ae |
Page generated in 0.002 seconds