Submitted by Caroline Xavier (caroline.xavier@pucrs.br) on 2017-06-26T14:49:22Z
No. of bitstreams: 1
DIS_JONAS_PEREIRA_ANDRADE_PARCIAL.pdf: 141765 bytes, checksum: 99338991681873f9d3d7028d9e7cdfa9 (MD5) / Made available in DSpace on 2017-06-26T14:49:22Z (GMT). No. of bitstreams: 1
DIS_JONAS_PEREIRA_ANDRADE_PARCIAL.pdf: 141765 bytes, checksum: 99338991681873f9d3d7028d9e7cdfa9 (MD5)
Previous issue date: 2017-01-19 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior - CAPES / The aim of the study was to evaluate, in vitro, the fracture resistance of occlusal veneers, made by CAD/CAM, with Lava Ultimate, e.max CAD and Vita Enamic materials in thicknesses of 0.6 mm and 1.5 mm. Seventy third human sound molars were randomly divided into seven groups (n = 10) according to the variables material and thickness, with the sound teeth as control. The root of the teeth was embedded into a self-cured acrylic resin and the teeth were prepared to simulate advanced erosion of the occlusal surface. The occlusal veneers were made using CAD-CAM technology, being luted to the preparation with adhesive systems and resin cements. After storage in distilled water at 37 ?C for 24 h, the samples were submitted to mechanical cyclic loading (1 million cycles at 100 N load). Subsequently, the sound teeth and the samples with the occlusal veneers were submitted to the fracture resistance test in a universal testing machine with crosshead speed of 1 mm/min. The failures were classified as reparable and irreparable. According to two-way ANOVA, the interaction between material and thickness was significant (p=0.013). The highest fracture resistance was obtained for the e.max CAD in the thickness of 1.5 mm (4995 N), being statistically superior to the other groups (p <0.05). The lowest fracture resistance was obtained for Vita Enamic at 0.6 mm thickness (2973 N), not being significantly different from e.max CAD 0.6 mm (3067 N), Lava Ultimate 0.6 mm (3384 N), Vita Enamic 1.5 mm (3540 N) and Lava Ultimate 1.5 mm (3584 N) (p>0.05). According to one- way ANOVA, the fracture resistance of the sound teeth (3991 N) did not differ significantly from the teeth with occlusal veneers (p> 0.05). The failures were predominantly repairable, except for sound teeth and Lava Ultimate 1.5 mm. The Lava Ultimate, e.max CAD and Vita Enamic occlusal veneers, in the thicknesses of 0.6 mm and 1.5 mm, showed fracture resistance exceeding the maximum masticatory forces. / O objetivo do estudo foi avaliar, in vitro, a resist?ncia ? fratura de facetas oclusais, confeccionadas por CAD/CAM, com os materiais Lava Ultimate, e.max CAD e Vita Enamic nas espessuras de 0,6 mm e 1,5 mm. Setenta terceiros molares humanos h?gidos foram aleatoriamente divididos em sete grupos (n=10) de acordo com as vari?veis material e espessura, tendo os dentes h?gidos como controle. A raiz dos dentes foi inserida em resina acr?lica quimicamente ativada e os dentes receberam um preparo para simular eros?o avan?ada da superf?cie oclusal. As restaura??es oclusais foram confeccionadas por meio da tecnologia CAD-CAM, sendo cimentadas ao preparo com sistemas adesivos e cimentos resinosos. Ap?s armazenagem em ?gua destilada a 37 ?C por 24 h, as amostras foram submetidas ? ciclagem mec?nica (1 milh?o de ciclos com carga de 100 N). Na sequ?ncia, os dentes h?gidos e as amostras com as facetas oclusais foram submetidas ao ensaio de resist?ncia ? fratura em m?quina de ensaio universal com velocidade de 1 mm/min. As falhas foram classificadas em repar?veis e irrepar?veis. De acordo com ANOVA de duas vias, a intera??o entre material e espessura foi significativa (p=0,013). A maior resist?ncia ? fratura foi obtida para o e.max CAD na espessura de 1,5 mm (4995 N), sendo estatisticamente superior aos demais grupos (p<0,05). A menor resist?ncia ? fratura foi obtida para o Vita Enamic na espessura de 0,6 mm (2973 N), n?o diferindo estatisticamente do e.max CAD 0,6 mm (3067 N), Lava Ultimate 0,6 mm (3384 N), Vita Enamic 1,5 mm (3540 N) e Lava Ultimate 1,5 mm (3584 N) (p>0,05). De acordo com ANOVA de uma via, a resist?ncia ? fratura dos dentes h?gidos (3991 N) n?o diferiu estatisticamente dos dentes com facetas oclusais (p>0,05). As falhas foram predominantemente do tipo repar?vel, com exce??o dos dentes h?gidos e Lava Ultimate 1,5 mm. As facetas oclusais em Lava Ultimate, e.max CAD e Vita Enamic, nas espessuras de 0,6 mm e 1,5 mm, demonstraram resist?ncia ? fratura que excede as for?as mastigat?rias m?ximas.
| Identifer | oai:union.ndltd.org:IBICT/oai:tede2.pucrs.br:tede/7368 |
| Date | 19 January 2017 |
| Creators | Andrade, Jonas Pereira |
| Contributors | Spohr, Ana Maria |
| Publisher | Pontif?cia Universidade Cat?lica do Rio Grande do Sul, Programa de P?s-Gradua??o em Odontologia, PUCRS, Brasil, Faculdade de Odontologia |
| Source Sets | IBICT Brazilian ETDs |
| Language | Portuguese |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
| Format | application/pdf |
| Source | reponame:Biblioteca Digital de Teses e Dissertações da PUC_RS, instname:Pontifícia Universidade Católica do Rio Grande do Sul, instacron:PUC_RS |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | -8096554818733665164, 600, 600, 600, 600, 4673435736271820140, -2070498469879244349, 2075167498588264571 |
Page generated in 0.0022 seconds