Return to search

Avaliação do desempenho de solventes não-halogenados na extração do poli(3-hidroxibutirato) a partir de Bacillus megaterium

Polihidroxialcanoatos (PHA) são polímeros sintetizados por diferentes bactérias, que têm despertado grande interesse industrial por suas características de biodegradabilidade e biocompatibilidade, fundamental para aplicações na área médica. Dentre o grande grupo de PHA, o polihidroxibutirato P(3HB) é o mais estudado devido suas propriedades térmicas e mecânicas semelhantes aos polímeros de fonte petroquímica. O processo de recuperação de PHA é uma das etapas de maior impacto no custo final desses materiais, sendo o método de recuperação por solventes o mais promissor para o escalonamento desse processo. Os solventes clorados são os mais utilizados atualmente. As principais bactérias estudas para produção de P(3HB) são Gram-negativas, o que implica em uma parede celular menos espessa, em relação a bactérias Gram-positivas, facilitando, assim, a difusão de massa através dessa barreira. Porém, essas bactérias Gram-negativas contêm lipopolissacarídeos (LPS), na qual pode estar presente o lipídeo A, uma endotoxina, extraída na técnica de recuperação de P(3HB) por solventes. Por ser Gram-positiva, o Bacillus megaterium não apresenta LPS na sua parede celular, além disso, é um microrganismo bastante versátil em relação ao substrato de cultivo, podendo se desenvolver em fontes de carbono complexas e baixo custo, como subprodutos agroindustriais. Dessa forma, esta pesquisa objetivou encontrar solventes alternativos aos halogenados para extração do P(3HB) a partir da biomassa de B. megaterium Foram realizados ensaios de solubilidade com acetato de etila (AcEt), metil etil cetona (MEK), dimetil carbonato (DC), propionato de isoamila (PIso), dimetilsulfóxido (DMSO), carbonato de propileno (CP), 2-heptanona (2-Hp) e N,N-dimetilacetamida (NNDA). AcEt, MEK e DC atingiram baixa concentração de polímero em solução, inferior a 0,08 g/L. Para os solventes que apresentaram maior afinidade com o P(3HB), determinou-se a faixa de concentração na qual se encontra a solubilidade do P(3HB) a 140 oC, O PIso, apresentou valor entre 1,3 e 2,5 g/L, o DMSO entre 65 e 70 g/L, e o CP, a 2-Hp e o NNDA superior a 100 g/L. Os quatro solventes de melhor desempenho, foram aplicados na extração de P(3HB) a partir da biomassa de B. megaterium. O DMSO não se mostrou seletivo, pois causou a digestão da parcela não-polimérica. A recuperação do P(3HB) pelo clorofórmio (Chl) foi usada como valor comparativo para os demais solventes, 6,52 ± 0,59% para 30 min de contato a 60 oC. O CP e 2-Hp apresentaram desempenho melhor que Chl, 17,6 ± 0,2% e 7,3 ± 0,1%, respectivamente, para 15 min e 140 oC. O NNDA foi o solvente de maior potencialidade, atingindo uma recuperação igual a 98,5 ± 1,06% em 30 min. / Polyhydroxyalkanoates (PHA) are polymers synthesized by different bacteria, that have been arousing industrial interest because of their biodegradability and biocompatibility properties, fundamental for application in the medical area. Among the large group of PHA the Polyhydroxybutyraten P(3HB) is the most studied due to its physical properties like polymers from pretrochemical sources. The PHA recovery process is one of the steps with greater impact in the final cost of these materials, being the recovery method using solvents the most promising one for scheduling the process. The chlorinated solvents are the most used currently. The main bacteria studied for the P(3HB) production are the Gram-negative, which implies in a thinner cell wall facilitating the mass transference through this barrier. However, these microorganisms present liposaccharide (LPS), in which lipid A may be present, an endotoxin extracted with the solvent recovery technique. It substantiates the importance of the research using Gram-positive bacteria that does not contain LPS. Besides been more versatile in relation to the growing substrate, able of developing in complex carbon sources as agroindustrial by products, without genetic manipulation. Therefore, this research aimed to find alternative solvents to the non-halogenated for the extraction of P (3HB) from the biomass of B. megaterium Were realized solubility tests with ethyl acetate (EtOAc), ethylmethylketone (MEK), dimethyl carbonate (DC), isoamyl propionate (PIso), dimethyl sulfoxide (DMSO), propylene carbonate (CP), 2-heptanone (2-Hp) and N, N-dimethylacetamide (NNDA). EtOAc, MEK and DC reached a low concentration of P(3HB) (Sigma-Aldrich®) in solution, lower than 0,08 g/L. For solvents that showed higher affinity with the P3HB, was determined a solubility range, PIso demonstrated a value between 1,3 and 2,5 g/L, DMSO between 65 and 70 g/L and CP, 2-Hp and NNDA greater to 100 g/L. The four solvents with the best performance were applied in the P(3HB) extraction from the biomass. The DMSO was not selective, since it caused the digestion of the non-polymeric portion. The P (3HB) recovery by chloroform (Chl) was used as comparative for the other solvents, 6,52 ± 0, 59% with 30 min of contact time and temperature of 60 ºC. The CP and 2-Hp showed a better performance than Chl, 17, 6 ± 0,2% and 7,3 ± 0,1%, respectively, with 15 min of contact time and temperature of 140 ºC. The solvent NNDA demonstrated the greater potentiality, reaching a recovery rate of 98,5 ± 1, 1%.

Identiferoai:union.ndltd.org:IBICT/oai:www.lume.ufrgs.br:10183/172032
Date January 2017
CreatorsBorges, Fernanda
ContributorsCardozo, Nilo Sérgio Medeiros, Rech, Rosane
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFRGS, instname:Universidade Federal do Rio Grande do Sul, instacron:UFRGS
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.003 seconds