Return to search

RemoÃÃo de Sulfato em Efluentes de Curtume usando Processo BiolÃgico / Sulfate removal in tannery wastewater using biological processes

FundaÃÃo de Amparo à Pesquisa do Estado do Cearà / A dissertaÃÃo teve como objetivo analisar a estabilidade e eficiÃncia do processo anaerÃbio de reduÃÃo de sulfato aplicado ao tratamento de efluente de um curtume. Utilizaram-se dois reatores anaerÃbios de manta de lodo e fluxo ascendente (UASB-Upflow Anaerobic Sludge Blanket), com capacidade de 3,0 litros, temperatura constante de 29+2ÂC e tempo de detenÃÃo hidrÃulica de 12 e 24 horas. Os reatores operaram com afluente sintÃtico e em seguida com afluente real. Inicialmente, com afluente sintÃtico, foram estudadas as relaÃÃes de DQO/SO4-2 de 1,4; 0,8 e 0,5. Os resultados obtidos demonstraram que a relaÃÃo DQO/SO4-2 de 0,8 apresentou a melhor eficiÃncia na remoÃÃo de DQO (87,8%) e remoÃÃo de sulfato (38,7%). Em seguida, o reator foi alimentado com afluente real e as remoÃÃes de DQO variaram de 20,4 a 58,5% e Sulfato de 39,4 a 73,9%, nas diferentes fases deste estudo. O sulfeto formado dentro do reator foi responsÃvel pela remoÃÃo de 39,7 a 77,6% do cromo presente no afluente real. Em todos os ensaios o reator apresentou estabilidade na produÃÃo de alcalinidade total e a concentraÃÃo de Ãcidos graxos volÃteis se manteve em nÃveis adequados. Os resultados obtidos permitiram concluir que a utilizaÃÃo do processo de reduÃÃo de sulfato em reatores
UASB apresenta-se como a alternativa promissora ao prÃ-tratamento de efluentes de curtume, visando a atender os limites de lanÃamento impostos pelos ÃrgÃos ambientais. / The research aimed to analyze the stability and efficiency of the anaerobic sulfate reduction applied to the treatment of effluent from a tannery. It was used two anaerobic reactors upflow anaerobic sludge blanket (UASB), with capacity of 3.0 liters, constant temperature of 29 +
2ÂC and hydraulic detention times of 12 and 24 hours. The reactors were operated with synthetic influent and then with real influent. First, synthetic influent was studied using DQO/SO4-2 ratio of 1.4, 0.8 and 0.5. The results showed that DQO/SO4-2 ratio of 0.8 showed the best removal efficiency of COD (87,8%) and removal of sulfate (38,7%). After, the reactor was fed with real influent and removals of COD ranged from 20.4 to 58.5% and removal of sulfate from 39.4 to 73.9% in the different phases of this study. The sulfide formed inside the reactor helped remove chromium present in the real influent from 39.7 to 77.6%. In all experiments the reactor was stable in the production of alkalinity and total volatile fatty acid concentration was maintained at adequate levels. The results showed that the use of the process of sulfate reduction in UASB reactors is presented as a promising alternative to pretreat effluents from tannery, to meet the release limits imposed by environmental agencies.

Identiferoai:union.ndltd.org:IBICT/oai:www.teses.ufc.br:4926
Date11 August 2010
CreatorsEveline Cunha Lima
ContributorsAndrea Lopes de Oliveira Ferreira
PublisherUniversidade Federal do CearÃ, Programa de PÃs-GraduaÃÃo em Engenharia QuÃmica, UFC, BR
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Biblioteca Digital de Teses e Dissertações da UFC, instname:Universidade Federal do Ceará, instacron:UFC
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0017 seconds