This thesis deals with the design and development of a 75 mm fixed-wing nano-air vehicle (NAV). The NAV is designed to fit inside a cube with each side measuring 75 mm. The range and endurance of the NAV are 300 m and 2-3 minutes, respectively. The high-wing horizontal tailless NAV has a take-off weight of 19.5 g. The battery-powered single propeller NAV has two control surfaces in the form of elevator and rudder.
This thesis contains a detailed account of the airfoil selection, selection of the configuration of NAV and the longitudinal, lateral and directional aerodynamic characterization of the NAV. The development of one of the lightweight autopilot hardware which weighs 1.8 g is also given in detail. The development of non-linear equations of motion of NAV including thrust and coupling effects is also discussed. The effects of the gyroscopic coupling and counter torque on the linear dynamics of the NAV are analyzed by conducting a parametric study about the variation of the eigenstructure attributable to the varying degree of coupling in the system matrix of the linear coupled model.
A robust simultaneously stabilizing output feedback controller is synthesized for stabilizing the plants of the NAV. The synthesizing of the robust simultaneously stabilizing output feedback controller is based on a frequency-shaped central plant. A new procedure is developed to determine the frequency-shaped central plant utilizing the v-gap metric between the plants, the frequency-shaping of the plants with the pre and post compensators and the robust stabilization theory. An optimization problem is formulated to obtain these compensators. A novel iterative algorithm is developed to acquire the compensators by solving the optimization problem. Thereafter, an iterative algorithm is developed to find an output feedback controller for robust simultaneous stabilization by blending the existing features of robust stability condition of right co-prime uncertainty model of the frequency-shaped central plant, the maximum v-gap metric of the frequency-shaped central plant, H∞ loop-shaping and eigenstructure assignment algorithm for output feedback using the genetic algorithm. The six-degree-of-freedom numerical and hardware-in-loop simulations (HILS) of closed-loop non-linear and linear plants of NAV are performed to assess the performance of the controller and to validate the control algorithm implemented in the autopilot.
The airworthiness of the aircraft is tested by conducting flight trials in radio-controlled (RC) mode without including the autopilot. The successful RC flight trial of the NAV indicates airworthiness of the aircraft which aided in freezing the configuration. This is one of the smallest fixed wing aerial vehicle that was successfully flown till date.
| Identifer | oai:union.ndltd.org:IISc/oai:etd.iisc.ernet.in:2005/3689 |
| Date | January 2017 |
| Creators | Pushpangathan, Jinraj V |
| Contributors | Bhat, M Seetharama |
| Source Sets | India Institute of Science |
| Language | en_US |
| Detected Language | English |
| Type | Thesis |
| Relation | G28507 |
Page generated in 0.0018 seconds