Maple sap was successfully transformed into maple syrup and maple syrup products by evaporation of water by microwave heating. Pulsed power supply with duty cycles of 100%, 75% and 60% were used for the microwave application. The dielectric properties of maple syrup at different moisture contents during the process were determined at 25$ sp circ$C. The products obtained were of excellent quality and were comparable to the highest grade prescribed by the industry. Pulsed power supply was found to have better efficiency of heating, but it increased the total time required for the process. The total time was also found to be dependent on the initial mass of the load. The behavior of the dielectric properties of the maple syrup was found to be fairly linear with moisture content and were found to be in close agreement with an empirical model found in literature. Microwave heating seems to have an enormous potential for production of high quality maple syrup.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.24002 |
| Date | January 1996 |
| Creators | Favreau, Denis. |
| Contributors | Raghavan, G. S. V. (advisor) |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Master of Science (Department of Agricultural and Biosystems Engineering.) |
| Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
| Relation | alephsysno: 001538763, proquestno: MM19811, Theses scanned by UMI/ProQuest. |
Page generated in 0.002 seconds