The physical manipulation of biological cells is very attractive now in biotechnology (Butler, 1991)) because it opens the possibility of examining and manipulating single molecules. Other methods are based on chemical effects, electrical effects, etc., and they generally do not allow researchers to examine single molecules cell and, thus, to understand their interaction which may encode many useful pieces of information. Such physical manipulation is fully performed by robotic devices. <p> In order to automate the process of physical manipulation, micro machine vision for the fast identification of the objects involved is required. Typical objects that are involved are cells, cell elements, holders and injectors. <p> In the research described in this thesis, which was carried out in the Advanced Engineering Design Laboratory of the Mechanical Engineering Department, University of Saskatchewan, algorithms for the three objects (the cell, holder and injector) were developed, implemented and tested. The results obtained have shown that the fastest identification times for these three objects are respectively 0.12s for the cell oocyte, 6.78s/100 frames for the holder, and 6.72s/100 frames for the injector. These performances are acceptable in the context of the physical manipulation of biological cells.<p> The goal of the research described in this thesis was to develop algorithms that would give a fast recognition of the cell manipulation system. With the aid of the algorithms, an automatic operation of the cell manipulation system would be achieved. Image process and pattern recognition techniques were used in developing the Visual C++ GUI algorithms that would automatically recognize the components of the cell manipulation system for the purpose of manipulating the cells.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-02192004-121633 |
| Date | 23 February 2004 |
| Creators | Diejomaoh, Blessing Ohwo |
| Contributors | Watson, L. Glen, Nguyen, Ha H., Gupta, Madan M., Gokaraju, Ramakrishna, Bolton, Ronald J., Zhang, W. J. (Chris) |
| Publisher | University of Saskatchewan |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-02192004-121633/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0021 seconds