Many different Flexible AC Transmission System (FACTS) devices have been studied in recent years in order to control the flow of power through transmission lines and reduce the overall burden on the power grid. The net results of these devices are decreased utility costs, increased system stability, and improved system flexibility. The main issues with most currently available FACTS controllers are the high costs of installation, and operation. The Sen Transformer (ST) is a new FACTS device that decreases these costs by using relatively inexpensive and industry familiar transformer technology to independently control the active and reactive power in a transmission line.<p>
This thesis introduces the first full transient model for the ST developed in an ElectroMagnetic Transients Program (EMTP) using a hybrid transformer modeling approach. This technique handles all the non-linearities of the core, including losses and saturation effects, as well as inter-phase coupling, and zero sequence effect with an attached topographically correct core model. This new model can be used in a variety of power system studies such as transient and dynamic simulations, and protection analysis. The flexibility of the hybid ST model allows for different core and winding configurations as well as response to very fast transients with little modification. Fault analysis studies are presented to showcase the capabilities of the transient ST model developed.<p>
The first ST transient model using the Finite Element Analysis (FEA) technique is also created for comparison with the hybrid ST model. This method uses Maxwells equations, material non-linearities and coupled electric circuits to obtain a precise transient solution for the ST. There is good agreement between the two models in a test system for multiple types of fault scenarios. The hybrid ST model is therefore the preferred model to use for fault analysis since it reduces simulation time drastically when compared to the FEA ST model.<p>
The hybrid ST model is then used to develop and test differential, and ground protection schemes that ensure device safety during faulted scenarios. The protection schemes are analyzed and compared with analogous Phase Angle Regulator (PAR) schemes that have been implemented for many years.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-08112010-160752 |
| Date | 23 August 2010 |
| Creators | Fentie, Donald |
| Contributors | Chowdhury, Nurul, Burton, Richard, Salt, Eric, Faried, Sherif, Gokaraju, Rama |
| Publisher | University of Saskatchewan |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-08112010-160752/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0024 seconds