Return to search

Reduction of co-simulation runtime through parallel processing

During the design phase of modern digital and mixed signal devices, simulations are run to determine the fitness of the proposed design. Some of these simulations can take large amounts of time, thus slowing down the time to manufacture of the system prototype. One of the typical simulations that is done is an integration simulation that simulates the hardware and software at the same time. Most simulators used in this task are monolithic simulators. Some simulators do have the ability to have external libraries and simulators interface with it, but the setup can be a tedious task. This thesis proposes, implements and evaluates a distributed simulator called PDQScS, that allows for speed up of the simulation to reduce this bottleneck in the design cycle without the tedious separation and linking by the user. Using multiple processes and SMP machines a simulation run time reduction was found.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:SSU.etd-09082009-140047
Date10 September 2009
CreatorsCoutu, Jason Dean
ContributorsMakaroff, Dwight, Bolton, Ron, Eager, Derek, Spiteri, Raymond
PublisherUniversity of Saskatchewan
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://library.usask.ca/theses/available/etd-09082009-140047/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.0059 seconds