Return to search

Experimental characterization of a bio-liquid fuel to be used as an additive for improving biodiesel combustion in cold weather conditions

Improvement of biodiesel’s cold flow properties still remains one of the major challenges for using it as an alternative fuel in diesel engines. Therefore, the main objective of the present research was to use newly developed liquid biofuels, 3-hydroxyl fatty acid esters and ethers, as an additive for improving biodiesel cold weather properties. Test results revealed that blending with 10% 3-hydroxyl fatty acid esters (C4, C6, C8 and C12) improved biodiesel volatility, cloud point, flash point and kinematic viscosity without a significant loss in LHV. However, blending biodiesel with 3-hydroxyl fatty acid esters negatively affected the oxidation stability which was then found to improve by blending with 3-hydroxyl fatty acid ethers (1,3-DMO and 1,3-DMD). The latter novel fuel substance (1,3-DMO and 1,3-DMD) exhibited much higher evaporation rate compared to biodiesel and only slightly lower than that of decane, gasoline or ethanol. Moreover, the LHV of 1,3-DMO and 1,3-DMD was found to be almost equal to that of canola biodiesel, and higher than that of methanol and ethanol. These findings suggest that 1,3-DMO and 1,3-DMD have the potential to be used as additive to improve biodiesel cold weather combustion performance or as standalone fuels. / February 2016

Identiferoai:union.ndltd.org:MANITOBA/oai:mspace.lib.umanitoba.ca:1993/30863
Date02 October 2015
CreatorsChowdhury, Abu Mahmud Iqbal
ContributorsBirouk, Madjid (Mechanical Engineering), Derksen, R.W. (Mechanical Engineering) Sorensen, John (Chemistry)
Source SetsUniversity of Manitoba Canada
Detected LanguageEnglish

Page generated in 0.0017 seconds