Return to search

A Study For The Development Of Seismic Design Specifications For Coastal Structures

An evolving design philosophy for port structures in many seismically active
regions reflects the observations that:
-The deformations in ground and foundation soils and the corresponding
structural deformation and stress states are key design parameters.
-Conventional limit equilibrium-based methods are not well suited to
evaluating these parameters.
-Some residual deformation may be acceptable.
Performance-based design is an emerging methodology whose goal is to
overcome the limitations present in conventional seismic design. Conventional
building code seismic design is based on providing capacity to resist a design
seismic force, but it does not provide information on the performance of structure
when the limit of the force-balance is exceeded. If we demand that limit equilibrium
not be exceeded for the relatively high intensity ground motions associated with a
rare seismic event, the construction cost will most likely be too high. If forcebalance
design is based on amore frequent seismic event, then it is difficult to
estimate the seismic performance of the structure when subjected to ground motions
that are greater than those used in design.
In this thesis a case study will be carried out on a typical port structure to
show the performance evolution aspects and its comparison with damage criteria
and performance grade in performance-based methodology.

Identiferoai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/1018639/index.pdf
Date01 January 2003
CreatorsGozpinar, Erdem
ContributorsYalciner, Ahmet Cevdet
PublisherMETU
Source SetsMiddle East Technical Univ.
LanguageEnglish
Detected LanguageEnglish
TypeM.S. Thesis
Formattext/pdf
RightsTo liberate the content for public access

Page generated in 0.0018 seconds