ABSTRACT
MONITORING AND STATISTICAL MODELLING OF DUST CONCENTRATION OF SOME TURKISH LIGNITES
UNDER LABORATORY CONDITIONS
Karakas, Ahmet
Ph.D., Department of Mining Engineering
Supervisor: Prof. Dr. Tevfik Gü / yagü / ler
September 2010, 171 pages
Although technological developments enable maximum safety, high dust formation is still a crucial problem in coal mining sector. This study is aimed to investigate the relationship between amount of coal dust produced during cutting operation and some important coal properties together with cutting parameters for different particle size ranges in laboratory conditions. For this purpose, six Turkish lignite samples were used in the experiments.
Two experiment sets were designed to generate coal dust by using cutting action of the saw. First group of experiments were conducted in large scale saw system by using saws having three different diameters and dust concentration measurements were done for three group of particle size namely: 0-2.5 &mu / m, 0-5 &mu / m and 0-10 &mu / m.
Second group of experiments were done in small scale saw system by changing the table advancing speed and tip speed of the system. For this group of experiments,
only one type of lignite samples were used. These measurements were carried out only 0-10 &mu / m particle size range by using a saw with 30 cm in diamater.
In this study, to characterize the lignite samples / proximate, petrographic and grindability analysis (HGI) were made. During the experiments, dust concentrations were measured by using Microdust Pro real time dust monitoring equipment.
At the end of the study, the relationship between coal dust concentration and some coal properties and cutting operating parameters were expressed by using four different regression equations. Also it has been found that tip speed of saw, fixed carbon, ash and huminite content, vitrinite reflectance and hardgrove grindability index are very important parameters in coal dust generation.
Keywords: Respirable Coal Dust, Dust Generation, Real Time Dust Sampler, Coal Dust Diseases, Coal Cutting Operation.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12612569/index.pdf |
| Date | 01 September 2010 |
| Creators | Karakas, Ahmet |
| Contributors | Guyaguler, Tevfik |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | Ph.D. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for METU campus |
Page generated in 0.0018 seconds