Return to search

A Stand-alone Induction Powered Current And Current Harmonics Measurement System For Distribution Lines

The presence of information and communication technologies in the field of energy is increasing every day. Smart grid subject which aims to increase the percentage of energy generation through renewable resources and to make consumers to be involved in grid actively, is gaining importance day by day. In order to provide an effcient and reliable operation of smart grid network, it is necessary to collect relevant parameters from network components via communication infrastructure and to evaluate collected information. Also, with the inclusion of distributed energy sources in the power lines, collection of relevant data becomes important in order to ensure the quality of power. In the scope of this study, to measure current parameters, two DSP based electronic circuits and necessary embedded software have been developed. Data acquisition card is a fixed device which is to be installed to a point on the power line to gather current value samples. By means of being fed through magnetic induction from the line, this part of the system could stay on-line permanently and this allows taking measurements on demand. Sampling of line current is performed through principle of magnetic induction from the line on current sensing instrument which is connected to data-acquisition part. Also by utilization of clamp-on instruments, cutting of energy lines is not needed. Samples received by control card over radio frequency or infrared communication, are evaluated with the help of Discrete Fourier Transform (DFT). Control card can show information about Root mean square (RMS) value and harmonic components of line current and total harmonics distortion (THD) on graphic LCD. Present state of the system was tested in LV and MV environments and shown to be used on distribution lines. The system presented in this study is open to improvements and suggestions to make the system to be able to work on high voltage lines are made.

Identiferoai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12614967/index.pdf
Date01 September 2012
CreatorsGokgoz, Sinan
ContributorsHizal, Mirzahan
PublisherMETU
Source SetsMiddle East Technical Univ.
LanguageEnglish
Detected LanguageEnglish
TypeM.S. Thesis
Formattext/pdf
RightsTo liberate the content for public access

Page generated in 0.0019 seconds