This study covers the recycling of waste poly(ethylene terephthalate) (PET) bottles through melt blending with low density polyethylene (LDPE) and polypropylene (PP). In general, polymer blends are known to be immiscible and incompatible with poor mechanical properties. This problem is due to the low intermolecular forces between the components of the immiscible blends. In order to enhance the interaction and compatibility between these matrices, some reactive or non-reactive copolymers were used. In this work / PET was treated with silane coupling agent (SCA) (low molecular weight reactive additive) for compatilization of LDPE-PP-PET blends. LDPE-PP-PET blends were prepared in different compositions (by weight) with and without silane coupling agent at high temperatures by a single screw extrusion and injection molding. Mechanical properties of treated and non-treated blends were studied in terms of tensile strength, strain at break and impact strength. Melt flow properties of blends were investigated by melt flow index. The impact fractured surfaces and thermal behaviour of the blends were examined with Scanning Electron Microscope (SEM) and Differential Scanning Calorimeter (DSC), respectively. Through out the studies, good adhesion between PET and LDPE-PP matrix was successfully achieved by the surface treatment of PET particles. The adhesion was also observed in SEM studies. Also the variation in mechanical properties was found to be highly dependent on the number of extrusion.
| Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/4/1045574/index.pdf |
| Date | 01 January 2003 |
| Creators | Dogan, Erkan |
| Contributors | Tincer, Teoman |
| Publisher | METU |
| Source Sets | Middle East Technical Univ. |
| Language | English |
| Detected Language | English |
| Type | M.S. Thesis |
| Format | text/pdf |
| Rights | To liberate the content for public access |
Page generated in 0.002 seconds