Return to search

Damage Monitoring in Woven Composites Using Fiber-Bragg Grating Sensors on Multiple Time Scales

This study investigates the application of Fiber Bragg Grating (FBG) optical sensors interrogation techniques over several time scales to monitor damage in composite structures due to low velocity impacts events. Optical fiber sensors are embedded into carbon fiber/epoxy resin woven composites using a single-step cure process. The composite specimens are subjected to multiple low energy impacts until failure. Impact events are characterized by acceleration and position sensors integral to the impactor head. The embedded FBG sensors are interrogated using three different interrogation techniques. Low speed, full spectrum measurements are recorded using a tunable laser source. High speed, peak wavelength detection data is taken using a commercial peak wavelength interrogation system. Finally, high speed full spectrum measurements are recorded using new instrumentation developed at Brigham Young University. By qualitatively examining the responses of these three techniques and comparing the FBG data with impact characterization data, a more complete picture of the composite health is available.

Identiferoai:union.ndltd.org:NCSU/oai:NCSU:etd-04252009-090648
Date11 May 2009
CreatorsPropst, Adam Christopher
ContributorsDr. K. J. Peters, Dr. M. A. Zikry, Dr. M. K. Ramasubramanian
PublisherNCSU
Source SetsNorth Carolina State University
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://www.lib.ncsu.edu/theses/available/etd-04252009-090648/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dis sertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.0021 seconds