Testing is performed on the 15 centimeter class pulsejet engine in order to develop, study, and explore the operational characteristics. Valved and valveless operation, hydrogen and propane fuels, various fuel injection methods, and a range of geometric configurations are investigated for operational feasibility. The scaling capabilities of a valveless 15 centimeter class pulsejet of conventional design are studied by methodically varying inlet length, exit length, exit geometry, and inlet area to combustor area ratio (Ai/Ac). Engine performance is defined by measuring chamber pressure, internal gas temperatures, time-resolved thrust, operational frequency, and fuel flow rate. The scaling capability is characterized by the success of self-sustained combustion for each corresponding geometric configuration. Tail pipe length is found to be a function of valveless inlet length and may be further minimized by the addition of a diverging exit nozzle. Chemical kinetic times and Ai/Ac prove to be the two prominent controlling parameters in determining scaling behavior.
| Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-08082005-095911 |
| Date | 08 August 2005 |
| Creators | Schoen, Michael Alexander |
| Contributors | Dr. A. Kuznetsov, Dr. H. Hassan, Dr. W. Roberts |
| Publisher | NCSU |
| Source Sets | North Carolina State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://www.lib.ncsu.edu/theses/available/etd-08082005-095911/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0025 seconds