An experimental 8 cm pulsejet was developed using scaling laws from research on both 50 and 15 cm pulsejets. The 8 cm jet operates in three different inlet configurations?conventional, perpendicular, and rearward. The rearward configuration features inlets facing in the opposite direction of the flight path and develops the maximum net thrust. Using a high frequency pressure transducer, the operational frequency of the pulsejet was obtained by monitoring the combustion chamber pressure. It was found that in the rearward configuration, the operational frequency of the jet decreases with increasing inlet length. In addition, the combustion chamber peak pressure rise per cycle increases significantly if the exhaust diameter is reduced. Using information from the 8 cm pulsejet, a 4.5 cm pulsejet was developed and is operational.
| Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-08112005-134914 |
| Date | 11 August 2005 |
| Creators | Kiker, Adam Paul |
| Contributors | Dr. Taofang Zeng, Dr. William Roberts, Dr. Andrey Kuznetsov |
| Publisher | NCSU |
| Source Sets | North Carolina State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://www.lib.ncsu.edu/theses/available/etd-08112005-134914/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0021 seconds