Return to search

Methods for the Determination of Aerodynamic Parameters and Trajectory Reconstruction of the Orion Command Module from Scale Model Aeroballistic Flight Data

Determination of aerodynamic coeffcients and stability derivatives is necessary in defning a model of the Orion CEV dynamics. This involves reducing experimental data, which can include acceleration, angular rate, or orientation data. This sort of extraction of dynamics from experimental data is often performed on data gathered from experiments conducted on uninstrumented models at indoor ballistics ranges. The US Army Research Laboratory (ARL) has developed a high-g survivable stand-alone instrumentation package that can transmit in-flight measurements of acceleration, angular rate, and local magnetic field. This telemetry module (TM) was installed in a scale model of the Orion CEV, which was red from a 175mm cannon at the ARL range. The instrumentation package was upgraded to include pressure transducers to measure forebody pressures. A minimum variance with a priori method was formulated to solve for both the "local" flight parameters of Mach number, angle of attack, and sideslip angle at each timestamp and the "global" parameters of scale factor and bias for each pressure transducer. Results using both simulated and experimental data indicates that these parameters may be estimated and used to compute stability coeffcients. Low pressure differentials between symmetrically-opposed pressure transducers, however, increased uncertainty in the parameter estimates. Validation of this method of data generation and analysis supports a low-cost method of vehicle testing.

Identiferoai:union.ndltd.org:NCSU/oai:NCSU:etd-11042008-170009
Date05 December 2008
CreatorsSebastian, Thomas Jr.
ContributorsFred DeJarnette, Robert Tolson, Andre Mazzoleni
PublisherNCSU
Source SetsNorth Carolina State University
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://www.lib.ncsu.edu/theses/available/etd-11042008-170009/
Rightsunrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dis sertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report.

Page generated in 0.0025 seconds