<p>This research developed a methodology for the capacity planning of a furniture finishing system using both deterministic analysis and stochastic simulation. The thesis includes the development of an interface through which users can interactively build a simulation model of a finishing system. The Excel-based interface de-couples data input from the simulation model construction and execution. This provides a user-friendly tool for analyzing a finishing system. A manufacturing manager unfamiliar with simulation techniques can use the interface to conduct simulations and experiment with various input parameters such as line loading techniques and line speeds. Through the interface, results from the simulation can be used in an iterative process to analyze and refine design parameters of the finishing system. Adjustments to input parameters are made, and the model is re-simulated until the user discovers and eliminates any problem areas within an existing finishing system or accurately determines the required workstation capacities for a proposed system.<P>
| Identifer | oai:union.ndltd.org:NCSU/oai:NCSU:etd-20001108-141441 |
| Date | 13 November 2000 |
| Creators | Melton, Ryan Heath |
| Contributors | C. Thomas Culbreth, Stephen D. Roberts, Jeffrey A. Joines, Don Ridgeway, Minor Rep |
| Publisher | NCSU |
| Source Sets | North Carolina State University |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://www.lib.ncsu.edu/theses/available/etd-20001108-141441 |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to NC State University or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0139 seconds