A simulation algorithm is proposed in this thesis to investigate the effects of lensed fiber parameters on the variation of radius of curvature of the melted lens and the coupling efficiency of butterfly type laser diode transiver module. Two different endface shapes, i.e. the taper and the conical-wedge type lensed fibers, will be studied. The effect of endface shapes, sizes, and the melting zone volume on the coupling efficiency of lensed fibers are simulated and discussed. In the study on the conical type lensed fiber, the MARC¡¦s elastic-plastic-thermal finite element model is employed to simulate the melting and the solidification processes at the fiber tip endface with different conical angles. The temperature dependent material properties are used to calculate the melting zone and the post-melten deformation during the heating process. The Surface Evolver Software has also been employed to simulate the solidified lens shapes. The variation of radius of curvature of the tip lens is analyzed. The ZEMAX optical analysis software is applied to explore the relation between the coupling efficiency and the distribution of the radius of curvature. The variation of laser signal coupling efficiency introduced from different conical lensed fibers is simulated numerically. A good agreement between the published measured data and the simulated results indicate the proposed simulation model is feasible.
The effect of endface shape and molten zone size on the conical wedge type lensed fiber has been studied in a similar way. The coherence between the shape of solidified elliptical lens at fiber tip and the coupling efficiency for the 980nm LD will be explored. Different endface shapes will also be investigated by using the simulation model proposed previously. Different aspect ratio of the conical-wedge type tip will be introduced to compensate the elliptical LD ray model and to recover the coupling efficiency loss. The agreement between the results simulated using the proposed model and the measured data is examined. The simulated results indicate that the coupling efficiency of a butterfly type laser diode transever can be improved significantly by controlling the shape of the lens introduced in this type lensed fiber. The optimal grinding parameters and the melting parameters used to fabricate the lensed fibers will also be studied. The effects of the shape parameters, i.e. the conical taper angle, the wedge angle and the size of molten zones on the curvature variation of the lens will also be studied. A better understanding about the design and fabrication of the lensed fiber of a laser diode based transever module is expected from the results presented in this thesis.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0208106-021356 |
| Date | 08 February 2006 |
| Creators | Peng, Wan-chen |
| Contributors | Jao-Hwa Kuang, Wood-Hi Cheng, Chi-Hui Chien, Ying-Chien Tsai, Der-Min Tsay |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0208106-021356 |
| Rights | not_available, Copyright information available at source archive |
Page generated in 0.0026 seconds