In recent years, the demand for higher cleanliness and air quality control of the indoor environment is increasing especially during the manufacturing process. Although different design standards and codes were adapted worldwide, the air flow pattern analysis still dominates the design process.
The parameters affecting the design process were cross-examined, including the air change rate, clean room sizes and layout, air supply and exhaust ports layout, unbalanced supply and exhaust air volume (QR=1.2QS), until system optimization is achieved.
Furthermore, FFU system with 0.46m/s air speed was identified to be appropriate for injection module designs. In order not to increase manufacturing cost, the FFU can be design with three-fiered speed control to provide energy efficiency with space flexibility. However, in low-speed operation, the slightly positive pressure cannot be maintained properly and should be avoided to operate in unconditioned rooms.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0619102-144750 |
| Date | 19 June 2002 |
| Creators | Wu, Yu-ping |
| Contributors | S. H. Wang, K. H. Yang, X. D. Lin |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0619102-144750 |
| Rights | unrestricted, Copyright information available at source archive |
Page generated in 0.0015 seconds