The primary target of this paper is to fabricate bidirectional transceiver modules based on Si-bench technology. The bidirectional transceiver modules were formed by hybrid integration of single mode lens fibers and ultra-thin thin-film filters (TFF) on silicon bench as using V-groove and U-groove techniques. The output light at 1.31 £gm was launched into the input lens fiber of the module. After passing through the TFF, the light was received by the output lens fiber of the module. The insertion loss of the module at the 1.31 £gm light was -0.68 dB. On the other hand, incoming lights at 1.49£gm and 1.55£gm were received from the output lens fiber. Lights at 1.49£gm will pass through the filter, and was received by the output lens fiber of the module. The insertion loss of the module at the 1.49 £gm light was -0.65 dB. The 1.55£gm wavelength lights received from the lens fiber are reflected by the filter and collected by the multimode fiber to the photo diode. The insertion loss of the module at the 1.55 £gm light was -0.58 dB.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0624109-170036 |
| Date | 24 June 2009 |
| Creators | Wang, Jyun-Ying |
| Contributors | Chao-Kuei Lee, Yi-Jen Chiu, Ann-Kuo Chu, Ting-Chang Chang |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0624109-170036 |
| Rights | not_available, Copyright information available at source archive |
Page generated in 0.0025 seconds