Return to search

Effects of membrane fouling on the operation of low pressure reverse osmosis system for water treatment

The tap-water treated by water treatment plants in southern Taiwan is coming from surface water of the rivers, subsurface stream and underground water of deep wells. The original raw water possesses were high level of hardness and ammonia- nitrogen solute due to affection by terrain, geology and human activities within water origin area. And considering the water quality from Kao-ping river origin is hard to control during in rain fall and dry season, we were to construction efficiency procedure of water treatment to obtain a high quality of drink water. There were high hardness and TDS from strata limestone of groundwater to increase treatment difficulty in southern Taiwan water treatment plant. Therefore, recommended that the influent water standards were limited hardness and silicate (SiO2) less than 300 mg/L and 15 mg/L, respectively. On the other hand, the metal substances Ca, Mg, Si and Al in influent water were 74.3 mg/L, 18.7 mg/L, 12.9 mg/L and 0.1 mg/L, respectively. Results show high inorganic substances that could increase the treatment loading. This project of the study, were make sure the problem of membrane clogging and fouling happened to the finest water treatment plants who use LPRO membrane system to remove the impurity in the influent water. Moreover, by accumulation of processes operation experience on site were according to water quality statistics data and membrane autopsy of single LPRO membrane by processes. In the same time, we prepared three single tube of RO membrane to experiment on site and collected data from before and after antifouling additive, that could find the membrane fouling and clogging results of the influent raw water. Obviously, the influent raw water quality into LPRO membrane is closely connected to the efficiency of treatment plant. The results show when the temperature decreased of influent raw water that could decrease the effluent volume from LPRO, because the water temperature affected by increase viscosity of raw water. The first part clogging substances of membrane were aluminum (Al), that could be use aluminate coagulant to make increase more aluminum. And the TOC value of the effluent were from 0.2 to 1.4 mg/L, that shows the effluent water was kept stably but UV254 value were have more than 75% efficiency. Results of organic analysis on LPRO effluent indicates the pretreatment process could leave annular structure organic. In other hand, when using EEFM to analysis the spectra sampling of organic of LPRO, there finding a lot low emission wavelength fluoresces of influent on EX/EM 230/340 and decrease the wavelength fluoresces value on EX/EM 280/330 and 240/340 by RO membrane system of LPRO. To be worth mentioning, when organism of sampling fluoresces value during high emission wavelength on EX/EM 240/400 nm was disappeared, that indicates RO membrane has good performance to separation organism of water. And results of elements analysis on RO membrane surface were using SEM and EDX have a lot aluminum and silicate on segment RO membrane module. Therefore, results show pretreatment process of coagulation and sedimentation could not treatment metal substances and organic efficiency, that was to effect directly cause to make the problems of membrane fouling and clogging.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0827112-144405
Date27 August 2012
CreatorsTsai, Wen-Chin
ContributorsChuan-Chi Chien, Chiu-Wen Chen, Wen-Liang Lai, Chin-Ming Kao, Andy Hong
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0827112-144405
Rightsuser_define, Copyright information available at source archive

Page generated in 0.0021 seconds