In this study, two sizes of diamond grinding wheels which are the diameter of 3 mm with thickness of 0.2 mm and the diameter of 1 mm with thickness of 0.1 mm are fabricated by a creative composite electroforming method. The pure nickel metal is set as anode. The micro cylindrical bar of tungsten carbide acted as spindle of the micro diamond grinding wheel, which is inserted into the hole of ABS mold and the conducting layer pre-coated on the local surface of ABS mold are set as cathode. The nickel sulfate bath mixing a constant amount of diamond particle is selected as electrolyte bath. At the current density of 2.5 ASD, the nickel-diamond composite layer with a constant thickness is electrodeposited on the ABS mold. When the ABS mold is dissolved by using acetone liquid, then the nickel-diamond composite layer could be used as the micro diamond grinding wheel is obtained.
Moreover, in the study, the effects of electroforming method, composition of the electrolyte and current density on the surface quality of nickel-diamond composite layer are investigated. From the experiment results, it can be know that at the current destiny of 2.5 ASD, the covered area of diamond particle in this composite layer is 54.19% using the external hanging pump. And the flatness on the surface of this composite layer electroformed in the nickel sulfamate bath is better than that in nickel sulfate bath.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0902110-162738 |
| Date | 02 September 2010 |
| Creators | Hsu, Feng-Yen |
| Contributors | Chung-Ming Lin, Rong-Tsong Lee, Li-Ming Chu, Yuang-Cherng Chiou, Yuh-Ping Chang |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0902110-162738 |
| Rights | not_available, Copyright information available at source archive |
Page generated in 0.0017 seconds