Return to search

Studies and design of horizontal-axis water turbines for electricity generation in an ocean current

In this thesis, the turbine blade design eligible for ocean current conditions is proposed using blade element momentum theory. in the beginning, the performance of water turbines is evaluated by CFD (computational fluid dynamics) package code, so as to design the suitable turbine under various conditions.
The blade design encompasses parameters of the hydrofoil selection and blade shape which affect the turbine performance. Shortly following the investigation of the aforementioned parameters, the turbine¡¦s performance with radius of two meter is also studied. The current conditions include the yaw and the pitch angle of the turbine relative to the current flow direction, as well as the periodic flow conditions on the performance of the water turbine. Lastly, the electricity generation is estimated by the present device.
The results show that hydrofoils with less changes in the angle of attack with respect to the lift-drag ratio help enhance the turbine¡¦s performance. The feedback mechanism is added to the blade design procedure to make sure that the turbine design caters to the best angle of attack. A turbine with two-meter radius can garner 34% of the sea current energy at most, living up to the project goal of exceeding the efficiency of 30%. The simulated test indicates that the adequate enlargement of the blade not only sustains the maximal efficiency, but it also lowers the stress imposed on the blade. Given the ocean current conditions, it is also shown that the turbine¡¦s efficiency is proportional to the cubic cosine incident angle of inflow velocity alongside with the enlargement of the turbine radius. When it comes to the current electricity generation, from the in-situ measurement data, the current maximal velocity near the sea region is around 1.3 m/s. If incorporated with the self excited induction generator with the efficiency of 55%, a one-meter-radius turbine is estimated to be able to generate 530W at most, while a two-meter-radius turbine is estimated to generate 2.5KW. However, the use of the permanent magnet generator can produce 45% more electricity than a self excited induction generator.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0902111-182840
Date02 September 2011
CreatorsPan, Hsin-hua
ContributorsLong-Jeng Chen, Chai-Cheng Huang, Shih-An Yang, Bang-Fuh Chen
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0902111-182840
Rightsuser_define, Copyright information available at source archive

Page generated in 0.0024 seconds