An electro-dynamic Magnetic Levitation vehicular system has been
modelled and studied. In practice, a MagLev vehicle will consist of a
number of cars which are mechanically coupled to each other. It is
reasonable to assume that each of these cars will be independently
controlled with the help of a supervisory controller. This thesis deals
with the control aspects of one such car.
The car is equipped with two control magnets one at the front end
and the other at the rear end. The currents in these magnets can be
varied to provide levitation and pitch-axis control. The rotational
aspects of the vehicle about the yaw and roll axes is neglected here.
The car has also a horizontal thrust producing mechanism, the
dynamics of which has been neglected.
A controller has been devised using frequency domain analysis. It is
shown that the vehicle Can be controlled effectively to meet nominal
ride specifications. These specifications are derived both from the
point of practical implementation of the vehicle and from the need to
ensure good ride quality.
The controller needs to be robust in its operation. This thesis shows
that a simple controller configuration is enough to maintain
satisfactory operation for a variety of operating conditions. It is also
shown that in the event of a disrupted magnet circuit, normal
operation can be restored with a backup set, without having to stop
the vehicle or endanger its occupants.
This study is entirely conceptual and no attempt has been made to
practically implement the system. It should also be noted that a
reasonable choice was made for the parameters of the model, that
compares closely to data from existing MagLev systems. / Graduation date: 1991
Identifer | oai:union.ndltd.org:ORGSU/oai:ir.library.oregonstate.edu:1957/37561 |
Date | 14 December 1990 |
Creators | Ramchandran, Ashok |
Contributors | Saugen, John L. |
Source Sets | Oregon State University |
Language | en_US |
Detected Language | English |
Type | Thesis/Dissertation |
Page generated in 0.0032 seconds