碩士 / 淡江大學 / 化學工程與材料工程學系碩士班 / 99 / The solar heated membrane seawater desalination system is constructed of solar collectors and membrane distillation devices for increasing pure water productivity. This technically and economically feasible system is designed to use indirect solar heat to drive membrane distillation processes to overcome the unstable supply of solar radiation from sunrise to sunset. The solar heated membrane seawater desalination system in the present study consists of hot water storage devices, heat exchangers, air gap membrane distillation units, and solar collectors. Aspen Custom Molder (ACM) software is used to model and simulate each unit and establishes the cost function of a desalination plant. From Design degree of freedom (DOF) analysis, there are nine design parameters investigated here to obtain the minimum total annual cost (TAC) with fixed pure water production rate. For a given solar energy density profile of typical summer weather, the minimum TAC per 1m3 pure water production can be found at 500 W/m2 by varying the solar energy density. Then, we proposed two modes for controlling the optimal design condition of the desalination plant; day and night. In order to widen the operability range of the plant, the sensitivity analysis was used to retrofit the original design point to lower the effluent temperature from the solar collector by increasing the hot water recycled stream. The simulation results show that the pure water production can be maintained at a very stable level even in sunny or cloudy weather.
| Identifer | oai:union.ndltd.org:TW/099TKU05063073 |
| Date | January 2011 |
| Creators | Yu-Wei Li, 黎育維 |
| Contributors | Yihhang Chen, 陳逸航 |
| Source Sets | National Digital Library of Theses and Dissertations in Taiwan |
| Language | zh-TW |
| Detected Language | English |
| Type | 學位論文 ; thesis |
| Format | 105 |
Page generated in 0.0092 seconds