This thesis presents a study of some of the factors affecting direct contact, liquid-liquid heat transfer from a continuous phase of 0.0%, 56.02%, 73.07%, and 77.06% glycerine-water solutions to a dispersed phase, which is vapourizing, of isopentane or cyclopentane. An average heat transfer coefficient based on the initial area, the total evaporation time, the total heat transferred, and the .temperature driving force at the end of evaporation was calculated. This coefficient was correlated to the parameters of the systems by the dimensionless groups of continuous phase Prandtl number, dispersed phase Prandtl number, and a viscosity ratio. The results are compared to the works of Klipstein, Sideman and Prakash.
A comparison made between the photographic and dilatometric method of volume measurement showed the dilatometric method to be the best for this type of work. / Applied Science, Faculty of / Chemical and Biological Engineering, Department of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/34381 |
| Date | January 1971 |
| Creators | Adams, Arthur Edward Steele |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0027 seconds