Return to search

The deformation of copper whiskers

The deformation of copper whiskers was studied by testing them at room and low temperatures in a specially built tensometer. The whiskers were grown by the standard method of hydrogen reduction of cupric chloride. X-ray studies of straight and kinked whiskers showed that crystallographic directions of the whisker axis other than <100>, <110>, and <111> are possible. In addition the formation of coherent twins is possible in copper whiskers grown by the above method. Tensile tests at various temperatures revealed a step effect, a hesitant flow and yield points in the flow region which were explained by proposing dislocation mechanisms. Tensile tests in dilute sulphuric acid showed that the oxide coating is not solely responsible for the strength of whiskers. / Applied Science, Faculty of / Mining Engineering, Keevil Institute of / Graduate

Identiferoai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/39567
Date January 1960
CreatorsSaimoto, Shigeo
PublisherUniversity of British Columbia
Source SetsUniversity of British Columbia
LanguageEnglish
Detected LanguageEnglish
TypeText, Thesis/Dissertation
RightsFor non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.

Page generated in 0.0017 seconds