In the iterative method for producing maximally-flat response for the multicavity klystron amplifier, a choice must be made in allocating poles to cavities. In this thesis, a method is described for selecting the tuning pattern which will give flat response with maximum gain for a specific multicavity klystron. The iterative method for multicavity klystron amplifiers is extended, to tubes with up to six cavities.
It is shown that the optimum tuning pattern has an appreciable advantage in gain over the alternative choices. The practice of allocating the highest-frequency pole to the penultimate cavity is justified, at least for relatively short tubes. Illustrative numerical tuning designs for four-, five- and six-cavity klystron amplifiers with different tuning patterns are given to verify the method.
The restrictions of small-signal fundamental-mode theory apply throughout the thesis. / Applied Science, Faculty of / Electrical and Computer Engineering, Department of / Graduate
| Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/39572 |
| Date | January 1960 |
| Creators | Yuan, John Tsong |
| Publisher | University of British Columbia |
| Source Sets | University of British Columbia |
| Language | English |
| Detected Language | English |
| Type | Text, Thesis/Dissertation |
| Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0026 seconds