Return to search

A Study on Latent Thermal Energy Storage (LTES) using Phase Change Materials (PCMs) 2020

The significant increase in energy requirements across the world, provides several opportunities for innovative methods to be developed to facilitate the storage and utilization of energy. The major energy demand is in the form of electrical energy for domestic as well as industrial sectors, a large part of which are the heating and cooling requirements. Appropriate utilization of thermal energy storage can effectively aid in reducing the electrical demand by storage and release of this thermal energy during peak hours.
Thermal Energy Storage using Phase Change Materials (PCMs) is an attractive method of energy storage, with a wide variety of potential applications. Several configurations have been tested by researchers to develop energy storage devices with PCMs. The cycling of melting and solidification of PCMs results in storage and release of heat at a relatively small temperature difference. Design and deployment of these storage systems have certain challenges and considerations associated to them for instance, when used in buildings, PCMs should be non-toxic, non-corrosive, and others.
In this thesis, we aim to provide models for designing Latent Thermal Energy Storage (LTES) devices with PCMs, based on their operating conditions, thermophysical properties of materials, and geometric parameters. The models are developed considering fluid dynamics and heat transfer involved in melting and solidification of PCMs. Parameters like inlet temperature and velocity, and volume of storage container are varied to determine the time taken for melting or solidification. For sizing and predicting performance of the storage devices we aim at presenting an analytical correlation, with time taken for melting as the variable defining the ‘charging/discharging time’ of storage device. Along with this, a transient model is developed to predict amount of PCM melted/solidified, along with rate of latent energy storage in defined time period intervals.

Identiferoai:union.ndltd.org:UMASS/oai:scholarworks.umass.edu:masters_theses_2-2017
Date18 December 2020
CreatorsDixit, Ritvij
PublisherScholarWorks@UMass Amherst
Source SetsUniversity of Massachusetts, Amherst
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceMasters Theses

Page generated in 0.0021 seconds