Return to search

Efeito da termorretificação nas propriedades físicas, mecânicas e na resistência a fungos deterioradores da madeira de Eucalyptus grandis Hill ex Maiden /

Orientador: Elias Taylor Durgante Severo / Banca: Claudio Angeli Sansigolo / Banca: Adriano Wagner Ballarin / Banca: Rosilei Aparecida Garcia / Banca: José Otavio Brito / Resumo: A madeira é um dos mais versáteis materiais de construção. Entretanto, considerando as pressões ambientais e a escassez de madeira nativa nas regiões Sul e Sudeste, deve-se utilizar madeiras alternativas. O gênero eucalipto se apresenta como uma solução para esse problema, porém possui limitações, tais como, altos níveis de tensões de crescimento, baixa permeabilidade e problemas de secagem, alta retratibilidade e susceptibilidade a fungos deterioradores. Uma forma comercialmente atrativa de se melhorar a estabilidade dimensional e a durabilidade biológica deste produto é a termorretificação da madeira logo após a sua secagem. Esse trabalho teve como objetivo avaliar o efeito da termorretificação sob diferentes condições de temperatura na qualidade da madeira de Eucalyptus grandis Hill ex Maiden. Para tanto, foram usadas tábuas provenientes de toras de Eucalyptus grandis, com cerca de 5,9 anos de idade, da empresa Duratex-SA. Cada uma das tábuas foi seccionada de modo a fornecer peças controle e outras destinadas para a termorretificação, com temperaturas finais de 140ºC, 160ºC, 180ºC, 200ºC e 220ºC. A qualidade da madeira foi determinada pelos seguintes ensaios: (1) perda de massa e variação da espessura das tábuas; (2) propriedades físicas (massa específica básica, a 0%, a 12,0% e a 17,5% de umidade, teor de umidade de equilíbrio, inchamentos volumétricos e lineares, coeficientes de retratibilidade e fator anisotrópico); (3) resistência a fungos deterioradores; e (4) propriedades mecânicas (compressão paralela às fibras, flexão estática e dureza Janka normal às fibras). Os resultados mostraram que: (1) a perda de massa das tábuas de E. grandis aumenta exponencialmente entre 0,004% e 5,7% com o aumento da temperatura de termorretificação de 140ºC até 220ºC; (2) na região próxima à medula há uma variação... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The wood is one of the most versatile building materials, however considering the environmental pressures associated with lack of native wood in the South and Southeast region, alternatives woods must be used. The Eucalyptus species are a solution to this problem however they have limitations such high levels of growth stress, high shrinkage, low permeability, drying defects and susceptibility to rot fungi. A commercially attractive way to improve the dimensional stability and durability of these products is this retification® process after its drying. The objetive of this work was evaluating the effect of retification®, under different temperatures on the quality of the Eucalyptus grandis Hill ex Maiden wood. In order to do it so, were used logs of Eucalyptus grandis trees, with 5.9 years of age from company Duratex-SA. Each board was cutting to provide pieces and those designed with control and retified® with temperatures of 140ºC, 160ºC, 180ºC, 200ºC and 220ºC. The quality of retified® wood was determined by the following tests (1) mass loss and tickness variation of boards; (2) physical properties (densities at 0%, 12.0% and 17.5% of moisture content, equilibrium moisture content, volumetric and linears swelling, shrinkage coeficient and anisotropic factor); (3) decay resitance of wood; and (4) mechanical properties (compression parallel to grain, static bending and Janka hardness perpendicular to grain). The results showed that: (1) the mass loss of Eucalyptus grandis boards exponentially increases from 0.004% to 5.7% with an increase of retification® temperature; (2) near pith there is a variation in the boards thickness reduction of up 99.6% with an increase of treatment temperature, while near bark this variation was of up to 18.5%; (3) with increase retification® temperature has an significant improvements on moisture content and volumetric, tangential, radial... (Complete abstract click electronic access below) / Doutor

Identiferoai:union.ndltd.org:UNESP/oai:www.athena.biblioteca.unesp.br:UEP01-000613022
Date January 2009
CreatorsCalonego, Fred Willians, 1977-
ContributorsUniversidade Estadual Paulista "Júlio de Mesquita Filho" Faculdade de Ciências Agronômicas (Campus de Botucatu).
PublisherBotucatu : [s.n.],
Source SetsUniversidade Estadual Paulista
LanguagePortuguese
Detected LanguagePortuguese
Typetext
Formatxii, 149 f. :
RelationSistema requerido: Adobe Acrobat Reader

Page generated in 0.003 seconds