<p>Pitch and heave are limiting motions when driving at high speed on water. The installation ofa T-foil is an effective solution that reduces these motions. Commercial T-foils are available,but today none of them are non-magnetic. This thesis studies the possibility to design anon-magnetic T-foil that can carry the considerable loads that such a constructionexperiences. The T-foil is designed for vessels such as the Visby Class corvette.</p><p>Vortex lattice theory is used to calculate the pressure distribution acting on the construction atdifferent load cases. Required laminate thickness is determined by iteration using a linearfinite element model of the fin.</p><p>The conclusion is that it is possible to manufacture a non-magnetic T-foil of the required size.A critical area in the construction is the T-joint between the vertical strut and the horizontalfoil. Future investigations should include laboratory tests of the T-joint as well as moredetailed hydrodynamic analysis for more accurate input parameters of the T-foil.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:kth-11029 |
| Date | January 2002 |
| Creators | von Sicard, Brunes |
| Publisher | KTH, Aeronautical and Vehicle Engineering |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
| Relation | Master Thesis, 1651-7660 ; 2002:33 |
Page generated in 0.0015 seconds