<p>Bit-serial multiplication with a fixed coefficient is commonly used in integrated circuits, such as digital filters and FFTs. These multiplications can be implemented using basic components such as adders, subtractors and D flip-flops. Multiplication with the same coefficient can be implemented in many ways, using different structures. Other studies in this area have focused on how to minimize the number of adders/subtractors, and often assumed that the cost for D flip-flops is neglectable. That simplification has been proved to be far too great, and further not at all necessary. In digital devices low power consumption is always desirable. How to attain this in bit-serial multipliers is a complex problem. </p><p>The aim of this thesis was to find a strategy on how to implement bit-serial multipliers with as low cost as possible. An important step was achieved by deriving formulas that can be used to calculate the carry switch probability in the adders/subtractors. It has also been established that it is possible to design a power model that can be applied to all possible structures of bit- serial multipliers.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:liu-1751 |
| Date | January 2003 |
| Creators | Johansson, Kenny |
| Publisher | Linköping University, Department of Electrical Engineering, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
| Relation | LiTH-ISY-Ex, ; 3391 |
Page generated in 0.0029 seconds