<p>A comparator-based switched capacitor integrator for use in a Delta Sigma ADC has been designed. Basic theory about comparator-based circuits has been presented and design equations have been developed. The integrator had a targeted performance of a bandwidth of 1.5MHz with a SNR of 80dB. Due to the lack of a complete modulator feedback system, the integrator was simulated in open-loop. For the integrator not to saturate in open-loop, an overshoot calibration circuit was enabled during the simulation. This resulted in a severe deterioration of the integrated signal. The results are therefore significantly lower than expected, with a SNR of about 39dB but can be expected to be better in a closed-loop simulation. The power consumption of the implemented modules is 0.43mW. However, this is without several modules which were implemented as ideal.</p>
| Identifer | oai:union.ndltd.org:UPSALLA/oai:DiVA.org:ntnu-9045 |
| Date | January 2009 |
| Creators | Torgersen, Svend Bjarne |
| Publisher | Norwegian University of Science and Technology, Department of Electronics and Telecommunications, Institutt for elektronikk og telekommunikasjon |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, text |
Page generated in 0.0044 seconds