Return to search

Analys av fri stationsuppställning med totalstation med avseende på mätta längder och riktningar / Analysis of the configuration of free-station by totalstation regarding distance and direction observables

Stationsetablering innebär bestämning av ett mätinstruments fysiska läge och orienterad riktning. I dagens bygg- och anläggningsbransch används nästan uteslutande fri station för att etablera en stationspunkt för mätningar. På en byggplats är tillgången till referensobjekt ofta begränsad. Instrumentets placering blir därför en kompromiss mellan tillgång till referensobjekt och tillgång till den plats där inmätning respektive utsättning skall ske. Denna kompromiss ger upphov till skiftande geometriska konfigurationer hos referensobjekten, vilka påverkar mätresultatet. Studiens syfte är att undersöka om simuleringar av fria stationsuppställningar i Svensk Byggnadsgeodesis (SBG:s) programvara Geo verifieras av fältmätningar och efterföljande beräkningar av osäkerhetsparametrar orsakade av konfiguration och mätta längder och riktningar. Delmål var att etablera ett testnät för att sedan genomföra simulering och fältmätning av fri stationsetablering mot. Analysen av fri stationsuppställning innefattade endast simulering och fältmätning i plan, med parametrarna X, Y och riktning. I samtliga konfigurationer verifieras simuleringarna av fältmätningarna genom att redovisade osäkerhetsellipser, till form och utbredning, överensstämmer. Detta innebär att genom simulering i SBG Geo kan svagheter i konfigurationer upptäckas och undvikas vid fältmätning, vilket är både tids- och resurssparande. Studiens slutsats är; Simulera mera. Simulering i SBG Geo visar god överensstämmelse med fältmätning och är där med ett effektivt planeringsverktyg för mätning samt att vid etablering av fri station bör referensobjekten placeras så att stationspunkten interpoleras för lägst osäkerhet. Faktorer att beakta vid fri station är, enligt studien: konfigurationen, mätningarnas kvalitet och att tillräcklig kontrollerbarhet (k-tal) föreligger / Station setup involves determination of the measuring instruments physical location and orientation. In today's construction industry free station is almost exclusively used to establish a station point for measurements. On a construction site, access to reference objects is often limited. The instruments placement therefore becomes a compromise between access to the reference objects and access to the site where surveying will take place. This compromise results in varying geometric configurations of the reference objects, which affect the results of the survey. This study aims to investigate whether the simulations of free station setups in Svensk Byggnadsgeodesis ( SBG's ) software Geo is verified by field measurements and subsequent calculations of uncertainty parameters caused by configuration and surveyed distances and directions. One objective of this study was to establish a test network of reference objects, which simulation and field measurement of free station were established against. The analysis of free station setup included only simulation and field measurement of plane surveying, with the parameters X, Y and direction. In all configurations, the simulations were verified by the field measurements by consistent corresponding of the shape of the error ellipses. This means that by simulation of SBG Geo, weaknesses in configurations can be detected and avoided during field survey, which saves both time and resources. Factors to consider when establishing free station is, according to the study: configuration, quality of the measurements and sufficient controllability (K-tal). The study concludes; simulate more. Simulation in SBG Geo show good representation of field measurements and is therefore an effective planning tool for field surveying. When establishing free station reference objects should be positioned so that the station point is interpolated for the lowest uncertainty

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:hv-6310
Date January 2014
CreatorsBroberg, Erik, Johansson, Robin
PublisherHögskolan Väst, Avd för naturvetenskap, lantmäteri- och maskinteknik, Högskolan Väst, Avd för naturvetenskap, lantmäteri- och maskinteknik
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageSwedish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0019 seconds