Return to search

Direct numerical simulation of turbulent flow in plane and cylindrical geometries

This thesis deals with numerical simulation of turbulentflows in geometrically simple cases. Both plane and cylindricalgeometries are used. The simplicity of the geometry allows theuse of spectral methods which yield a very high accuracy usingrelatively few grid points. A spectral method for planegeometries is implemented on a parallel computer. Thetransitional Reynolds number for plane Couette flow is verifiedto be about 360, in accordance with earlier findings. TurbulentCouette flow at twice the transitional Reynolds number isstudied and the findings of large scale structures in earlierstudies of Couette flow are substantiated. These largestructures are shown to be of limited extent and give anintegral length scale of six half channel heights, or abouteight times larger than in pressure-driven channel flow.Despite this, they contain only about 10 \% of the turbulentenergy. This is demonstrated by applying a very smallstabilising rotation, which almost eliminates the largestructures. A comparison of the Reynolds stress budget is madewith a boundary layer flow, and it is shown that the near-wallvalues in Couette flow are comparable with high-Reynolds numberboundary layer flow. A new spectrally accurate algorithm isdeveloped and implemented for cylindrical geometries andverified by studying the evolution of eigenmodes for both pipeflow and annular pipe flow. This algorithm is a generalisationof the algorithm used in the plane channel geometry. It usesFourier transforms in two homogeneous directions and Chebyshevpolynomials in the third, wall-normal, direction. TheNavier--Stokes equations are solved with a velocity-vorticityformulation, thereby avoiding the difficulty of solving for thepressure. The time advancement scheme used is a mixedimplicit/explicit second order scheme. The coupling between twovelocity components, arising from the cylindrical coordinates,is treated by introducing two new components and solving forthem, instead of the original velocity components. TheChebyshev integration method and the Chebyshev tau method isboth implemented and compared for the pipe flow case.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-3054
Date January 2000
CreatorsKomminaho, Jukka
PublisherKTH, Mekanik, Stockholm : Mekanik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTrita-MEK, 0348-467X ; 2000:14

Page generated in 0.0021 seconds