This master’s thesis has been performed in Bangkok, Thailand at the company Eco Design Consultant Co., Ltd. The aim is to investigate the possibilities to generate absorption cooling from municipal solid waste in the Bangkok area. The investigation includes a comparison between waste incineration and biogas production with combustion to see which alternative is preferable. During the investigation, a Swedish perspective has been used. The research for the report mainly consisted of published scientific articles from acknowledged sources as well as information from different Thai authorities. Also, experts within different areas were contacted and interviewed. In order to determine which of the two techniques (waste incineration or biogas production with combustion) that is best suited to generate absorption cooling, a model was designed. This model involved several parameters regarding e.g. plant efficiency, amount of treated waste and internal heat usage. As for the results of the model, three parameters were calculated: the generated cooling, the net electricity generation and the reduced greenhouse emissions. The overall Thai municipal solid waste generation in Thailand is estimated to approximately 15 million tons per year and the majority of the waste ends up at open dumps or landfills. There are only two to three waste incinerators in the country and a few projects with biogas generation from municipal solid waste. The main electricity is today generated from natural gas which makes the majority of the Thai electricity production fossil fuel based. As for absorption cooling, two applications of this technique has been found in Thailand during the research; one at the Naresuan University and one at the Suvarnabhumi airport in Bangkok. The model resulted in that the best alternative to power absorption cooling technique is waste incineration. This alternative has potential to generate 3200 GWh cooling per year and 1100 GWh electricity per year. Also, this alternative resulted in the largest decrease of greenhouse gas emissions, ‐500 000 tons per year. The model also showed that the same amounts of generated cooling and electricity can never be achieved from biogas production with combustion compared to waste incineration. Regardless, waste incineration has an important drawback: the citizens of Thailand seem to oppose further development of waste incineration in the country. The biogas technique seems more approved in Thailand, which benefits this alternative. Due to the high moisture and organic content in the municipal solid waste, a combination between the two waste handling alternatives is suggested. This way, the most energy can be withdrawn from the waste and the volume of disposed waste is minimized. Our overall conclusion is that the absorption cooling technique has great potential in Thailand. There is an increasing power‐ and cooling demand, absorption cooling generated from either or both of the alternatives can satisfy these demands while reducing greenhouse gas emissions. We also believes that the cost for using absorption cooling has to be lower than for the current compression cooling if the new technique is to be implemented further.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-57240 |
| Date | January 2010 |
| Creators | Hedberg, Erika, Danielsson, Helén |
| Publisher | Linköpings universitet, Industriell miljöteknik, Linköpings universitet, Industriell miljöteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/masterThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0061 seconds