PolyTech AB in Malmköping manufactures gyro stabilized camera systems or helicopter applications. In this Master´s Thesis a shaker test rig for vibration testing of these systems is designed, implemented and evaluated. The shaker is required to have an adjustable frequency and displacement and different shakers that meet these requirements are treated in a literature study. The shaker chosen in the test rig is based on a mechanical solution that is described in detail. Additionally all components used in the test rig are described and modelled. The test rig is identified and evaluated from different experiments carried out at PolyTech, where the major part of the identification is based on data collected from accelerometers. The test rig model is used to develop a controller that controls the frequency and the displacement of the shaker. A three-phase motor is used to control the frequency of the shaker and a linear actuator with a servo is used to control the displacement. The servo controller is designed using observer and state feedback techniques. Additionally, the mount in which the camera system is hanging is modelled and identified, where the identification method is based on nonlinear least squares (NLS) curve fitting technique.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-7397 |
| Date | January 2006 |
| Creators | Eklånge, Johannes |
| Publisher | Linköpings universitet, Institutionen för systemteknik, Institutionen för systemteknik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0026 seconds