Return to search

Design av slutsteg med digital PWM-teknik för gitarr

Softube has developed DSP-card and software for simulation of the sound of old tube amplifiers. The purpose with this thesis is to design a compact amplifier with high power to function together with the DSP-card and build a unit that can replace several other guitar amplifiers. The advantages with that kind of solution could be that it would be cheaper, easier to carry and easier to stor than the real amplifiers. The amplifier that has been designed is of class D type with digital PWM modulator. There is several types of amplifier modules on the market that use analog input signal, but if one of them would be used a D-A converter is needed on the DSP card. The resultate of this thesis is an amplifier with 400 W output power, with 0.4% distorsion on 1 kHz and with 70% of the maximum signal. The report contains of three main blocks. The first block with general information of class D amplifiers, next block with the construction of this amplifier, and the last block with messurements of the amplifier. / Softube har utvecklat DSP-kort och mjukvara för att simulera ljudet från rörförstärkare. Syftet med det här examensarbetet är att konstruera en kompakt förstärkare med hög effekt som ska fungera tillsammans med DSP-kortet för att bilda en enhet som ska kunna ersätta flera olika typer av gitarrförstärkare. Fördelar med en sådan lösning är att den skulle vara lättare att bära, ta mindre plats och bli billigare, än om de riktiga förstärkarna används. Förstärkaren som konstruerats är av klass D-typ med digital modulator. Det finns ett antal olika färdiga moduler som utgår från en analog signal, men eftersom signalen från DSP-kortet kommer i digital form skulle i så fall en separat DA-omvandlare behövas. Resultatet är en förstärkare på ca 400 W, med 0,4% distorsion vid 1 kHz och 70% av maximal signalnivå. Rapporten består av en allmän faktadel där principerna för klass D presenteras, en del som beskriver konstruktionen av just den här förstärkarmodulen, och sist en resultatdel med mätningar.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-8054
Date January 2006
CreatorsBjärhusen, Jonas
PublisherLinköpings universitet, Institutionen för systemteknik, Institutionen för systemteknik
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageSwedish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0055 seconds