This independent degree project has been implemented on behalf of FVB Sverige AB in collaboration Sundsvall Energi AB with the initial purpose of mapping manufacturers of hot water driven absorption chillers. After that, several technical solutions are examined to manage the peak load of a theoretical object which cannot produce the cooling power required with only an absorptions chiller, due to limitations in the district heating supply. The market study has shown that the supply of absorption chillers with drive temperatures of 70–90˚C is limited to a few manufacturers. World Energy offers a unit with drive temperatures of 70 ˚C and efficiency (COP) of 0,4. Due to limitations of district heating flow, a unit with drive temperature of 85 ˚C and efficiency of 0,77 is chosen. The technical solutions are dimensioned for a building with a peak power of 264 kilowatt, where the required peak load ranges from 31 to 39 kilowatt. The technical solutions examined are a solar collector system, tap water heat exchanger, and a conventional compressor driven chiller. The solar collectors are dependent on location but use no refrigerants that are affected by the F-gas regulation. The tap water solution consumes large flows of tap water, but the installation is simple. The conventional chiller is not location dependent but uses ozone degrading refrigerants and has a high cost of operation. From an economic perspective the technical solutions are equally profitable with a present net value of approximately 500 000 SEK and pay-back of 13 years. The examination has also shown that the present value is one million crowns in sales of heat and building after a ten-year period. In conclusion the conventional chiller has the biggest prerequisites to be used as a standardised solution for buildings with a bigger cooling load. Based on the technical and economical conditions.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:miun-42412 |
| Date | January 2021 |
| Creators | Strömqvist, Bodil |
| Publisher | Mittuniversitetet, Institutionen för elektronikkonstruktion |
| Source Sets | DiVA Archive at Upsalla University |
| Language | Swedish |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0029 seconds