Elliptic curve cryptosystem is one type of public-key system, and it can guarantee the same security level with Rivest, Shamir and Adleman (RSA) with a smaller key size. Therefore, the key of elliptic curve cryptography (ECC) can be more compact, and it brings many advantages such as circuit area, memory requirement, power consumption, performance and bandwidth. However, compared to private key system, like Advanced Encryption Standard (AES), ECC is still much more
complicated and computationally intensive. In some real applications, people usually combine private-key system with public-key system to achieve high performance. The ultimate goal of this research is to architect a high performance ECC processor for high performance applications such as network server and cellular sites.<p>
In this thesis, a high performance processor for ECC over Galois field (GF)(2^163) by using polynomial presentation is proposed for high-performance applications. It has three finite field (FF) reduced instruction set computer (RISC) cores and a main controller to achieve instruction-level parallelism (ILP) with pipeline so that the largely parallelized algorithm for elliptic curve point multiplication (PM) can be well suited on this platform. Instructions for combined FF operation are proposed to decrease clock cycles in the instruction set. The interconnection among three FF cores and the main controller is obtained by analyzing the data dependency in the parallelized algorithm. Five-stage pipeline is employed in this architecture. Finally, the u-code executed on these three FF cores is manually optimized to save clock cycles. The proposed design can reach 185 MHz with 20; 807 slices when implemented on Xilinx XC4VLX80 FPGA device and 263 MHz with 217,904 gates when synthesized with TSMC .18um CMOS technology. The implementation of the proposed architecture can complete one ECC PM in 1428 cycles, and is 1.3 times faster than the current fastest implementation over GF(2^163) reported in literature while consumes only 14:6% less area on the same FPGA device.
| Identifer | oai:union.ndltd.org:USASK/oai:usask.ca:etd-05032010-135617 |
| Date | 22 June 2010 |
| Creators | Zhang, Yu |
| Contributors | Ko, Seok-Bum, Chen, Li, Dinh, Anh v., Teng, Daniel, Eager, Derek |
| Publisher | University of Saskatchewan |
| Source Sets | University of Saskatchewan Library |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-05032010-135617/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0018 seconds