The use of carbon nanotubes (CNTs) as a material for construction of sensors is a promising effort. This is due to some unique characteristics of CNTs. In recent years, strain sensors built from CNT composite films have been developed. This thesis study first proposed that the piezoresistive sensitivity of CNT composite
films can be limited due to the presence of one of the constituent elements in the CNT composite films, that is, surfactant. CNT films free of surfactants were thus hypothesized to have a great promise to improve piezoresistive sensitivity. The motivation of this thesis study was to explore this promise.<p>
This thesis presents an experimental study on Single-Wall CNT (SWNT) films free
of surfactants. Such SWNT films are called pure SWNT films. The study has concluded: (1) the gauge factor of one layer SWNT film is much higher than that of CNT composite film; (2) the fabrication of multilayered pure CNT films is highly possible; (3) the gauge factor of multilayered pure SWNT films (10 layers and
0.8mg/ml concentration) can reach as high as 2.59 with non-linearity of 0.89% and repeatability of 0.1%, which outperforms the strain sensor built from CNT composite films; (4) the role of surfactants is indeed restrictive to piezoresistive response, and (5) the junction theory is likely applicable to pure SWNT film sensors.<p>
The main contributions of this thesis study are: (1) the finding of a new type of strain sensors built from pure CNT films and (2) the development of a fabrication process for multilayered pure SWNT films.
| Identifer | oai:union.ndltd.org:USASK/oai:usask.ca:etd-08172010-165151 |
| Date | 27 August 2010 |
| Creators | Miao, Yu |
| Contributors | Torvi, David, Zhang, Chris, Li, Chen, Akindele, Odeshi |
| Publisher | University of Saskatchewan |
| Source Sets | University of Saskatchewan Library |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-08172010-165151/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0026 seconds