Polyetheretherketone (PEEK) is a Federal and Drug Administration (FDA) approved biomaterial that has been used as an orthopedic implant material due to its inherent properties. Laser etching has become a popular means to create identication markers on the individual implants as required by the FDA. The interaction of laser energy with polymeric materials could potentially cause changes in the material's biocompatibility and mechanical properties. The objective of this study was to determine the effect of laser energy on the biocompatibility and mechanical properties of implantable PEEK by measuring contact angle, micro-tensile testing, nite-element modeling (FEM), and biocompatibility testing according to International Organization for Standardization (ISO) 10993 for cytotoxicity. The results of the study showed that the etching characteristics were mostly in by the laser power and the laser pulse spacing. The mechanical properties were degraded by the laser and the tensile strength of the material was decreased by 50% is some cases. The laser, however, did not affect the biocompatibility. The biocompatibility testing of the material showed no cytotoxic effect using an agar overlay method. The contact angle measurements demonstrated that the laser etching produced a hydrophobic effect to the surface. The FEM model demonstrated a good correlation between the laser power and the vaporization of the PEEK material. The results of the study showed the effect of laser energy on biocompatibility and mechanical properties.
| Identifer | oai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-4099 |
| Date | 01 May 2014 |
| Creators | Deceuster, Andrew I. |
| Publisher | DigitalCommons@USU |
| Source Sets | Utah State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | All Graduate Theses and Dissertations |
| Rights | Copyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact Andrew Wesolek (andrew.wesolek@usu.edu). |
Page generated in 0.0022 seconds