This dissertation introduces scanning probe microscopy (SPM) and describes the construction and design of a home built low temperature magnetic force microscope (MFM). Then the magnetic coatings on atomic force microscope cantilevers with a focused ion beam (FIB) will be explained. This technique allows the convenient deposition of complex or expensive materials such as CoCrPt. With the MFM tip coated by FIB, the ferromagnetic domain structure of a La[subscript 0.67]Ca[subscript 0.33]MnO₃ film is studied as a function of an in-plane magnetic field below room temperature. Next I will discuss the use of chemically-synthesized FePt nanocrystals as a good candidate for high density storage media. This nanocrystal film showed sintering problems during the annealing process, which is essential to make FePt a hard ferromagnet. A silica overcoating method was used to prevent nanocrystal sintering, which allowed the MFM study of films made from these nanocrystals. I will also discuss resistance measurements of the FePt nanocrystals.
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/3604 |
| Date | 28 August 2008 |
| Creators | Hyun, Changbae, 1974- |
| Contributors | Lozanne, Alejandro L. de |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | electronic |
| Rights | Copyright © is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works. |
Page generated in 0.0027 seconds