The aim of this research was to develop and fully investigate a novel method of antibiotic drug delivery to the lung that will address problems with current therapeutic regimens for treatment of airway infections. To demonstrate the performance of prepared formulations, the design of suitable characterization methods were also aimed. A novel dissolution method for evaluating the in vitro dissolution behavior of inhalation formulations was developed. The membrane holder was designed to enclose previously air-classified formulations so that they could be uniformly tested in the dissolution apparatus. Dissolution procedures, the apparatus, the dose collection, the medium, and test conditions were developed and the dissolution behaviors of test compounds were evaluated by experimental and mathematical analysis. It was proved that the aerodynamic separation of formulation prior to dissolution assessment have a significant influence on the dissolution profiles. The optimized test method using the membrane holder was applied to evaluate in vitro dissolution profiles of the manufactured formulations of rifampicin (RF). The carrier/excipient-free RF dry powder formulation was investigated. The rifampicin dihydrate (RFDH) powders having MMAD of 2.2 um were prepared using a simple recrystallization process. The RFDH powders have a thin flaky structure, and this unique morphology provides improved aerosolization properties at maximal API loading. The manufactured RFDH formulation showed 80% drug release within 2 hours. To retard the release rate of RF, the prepared RFDH crystals were coated with hydrophobic polymer, PLA or PLGA, using spray-dryer equipped with multi-channel spray nozzles. The multi-channel spray nozzle used in this study has two separate nozzles for aqueous solution and one for gas fluid. The RFDH crystals and the coating solutions were sprayed through the two separate liquid nozzles at the same time. The coated RFDH formulations were prepared using multi-channel spray nozzles. The coated formulations contained at least 50% w/w of RF with no change of their flaky morphology. The initial RF release was lowered by coating; the lowest initial RF release was observed from the coated powders with PLA polymer as 32% among the coated formulations. Overall, the 80% of RF was released within 8 hours. The RFDH and coated RFDH formulations delivered via the pulmonary route would be anticipated to provide higher local (lung) drug concentrations than that of orally delivered powders. Particularly, the coated RFDH powders deposited in the alveolar region may prolong the drug residence time in the site of infections. Additionally, it was proved that the RFDH and coated RFDH formulations provided much better stability than the amorphous RF. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2010-12-2230 |
| Date | 09 February 2011 |
| Creators | Son, Yoen Ju |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | thesis |
| Format | application/pdf |
Page generated in 0.0023 seconds