There are a number of testability considerations for VLSI design,
but test coverage, test time, accuracy of test patterns and
correctness of design information for DFD (Design for debug) are
the most important ones in design with embedded memories. The goal
of DFT (Design-for-Test) is to achieve zero defects. When it comes
to the memory subsystem in SOCs (system on chips), many flavors of
memory BIST (built-in self test) are able to get high test
coverage in a memory, but often, no proper attention is given to
the memory interface logic (shadow logic). Functional testing and
BIST are the most prevalent tests for this logic, but functional
testing is impractical for complicated SOC designs. As a result,
industry has widely used at-speed scan testing to detect delay
induced defects. Compared with functional testing, scan-based
testing for delay faults reduces overall pattern generation
complexity and cost by enhancing both controllability and
observability of flip-flops. However, without proper modeling of
memory, Xs are generated from memories. Also, when the design has
chip compression logic, the number of ATPG patterns is increased
significantly due to Xs from memories. In this dissertation, a
register based testing method and X prevention logic are presented
to tackle these problems.
An important design stage for scan based testing with memory
subsystems is the step to create a gate level model and verify
with this model. The flow needs to provide a robust ATPG netlist
model. Most industry standard CAD tools used to analyze fault
coverage and generate test vectors require gate level models.
However, custom embedded memories are typically designed using a
transistor-level flow, there is a need for an abstraction step to
generate the gate models, which must be equivalent to the actual
design (transistor level). The contribution of the research is a
framework to verify that the gate level representation of custom
designs is equivalent to the transistor-level design.
Compared to basic stuck-at fault testing, the number of patterns
for at-speed testing is much larger than for basic stuck-at fault
testing. So reducing test and data volume are important. In this
desertion, a new scan reordering method is introduced to reduce
test data with an optimal routing solution. With in depth
understanding of embedded memories and flows developed during the
study of custom memory DFT, a custom embedded memory Bit Mapping
method using a symbolic simulator is presented in the last chapter
to achieve high yield for memories. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2011-12-4507 |
| Date | 01 February 2012 |
| Creators | Seok, Geewhun |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | thesis |
| Format | application/pdf |
Page generated in 0.002 seconds