The depletion of oil reserves and higher oil prices has made chemical enhanced oil recovery (EOR) methods more attractive in recent years. Because of geological heterogeneity, unfavorable mobility ratio, and capillary forces, conventional oil recovery (including water flooding) leaves behind much oil in reservoir, often as much as 70% OOIP (original oil in place). Surfactant/polymer flooding targets these bypassed oil left after waterflood by reducing water mobility and oil/water interfacial tension. The complexity and uncertainty of reservoir characterization make the design and implementation of a robust and effective surfactant/polymer flooding to be quite challenging. Accurate numerical simulation prior to the field surfactant/polymer flooding is essential for a successful design and implementation of surfactant/polymer flooding.
A recently developed unified polymer viscosity model was implemented into our existing polymer module within our in-house reservoir simulator, the Implicit Parallel Accurate Reservoir Simulator (IPARS). The new viscosity model is capable of simulating not only the Newtonian and shear-thinning rheology of polymer solution but also the shear-thickening behavior, which may occur near the wellbore with high injection rates when high molecular weight Partially Hydrolyzed Acrylamide (HPAM) polymers are injected.
We have added a full capability of surfactant/polymer flooding to TRCHEM module of IPARS using a simplified but mechanistic and user-friendly approach for modeling surfactant/water/oil phase behavior. The features of surfactant module include: 1) surfactant component transport in porous media; 2) surfactant adsorption on the rock; 3) surfactant/oil/water phase behavior transitioned with salinity of Type II(-), Type III, and Type II(+) phase behaviors; 4) compositional microemulsion phase viscosity correlation and 5) relative permeabilities based on the trapping number. With the parallel capability of IPARS, commercial scale simulation of surfactant/polymer flooding becomes practical and affordable.
Several numerical examples are presented in this dissertation. The results of surfactant/polymer flood are verified by comparing with the results obtained from UTCHEM, a three-dimensional chemical flood simulator developed at the University of Texas at Austin. The parallel capability and scalability are also demonstrated. / text
| Identifer | oai:union.ndltd.org:UTEXAS/oai:repositories.lib.utexas.edu:2152/ETD-UT-2012-08-401 |
| Date | 25 October 2012 |
| Creators | Yuan, Changli |
| Source Sets | University of Texas |
| Language | English |
| Detected Language | English |
| Type | thesis |
| Format | application/pdf |
Page generated in 0.0026 seconds