Renewable energy is a critical component in combating climate change. Ocean wave energy is a source of renewable energy that can be harvested using Wave Energy Converters (WECs). One such WEC is the floating Oscillating Water Column (OWC), which has been successfully field tested and warrants further exploration. This research implements a publicly accessible code in MatLab and SimuLink to simulate the dynamics of a floating OWC in the time domain. This code, known as the Floating OWC Iterative Time Series Solver (FlOWCITSS), uses the pressure distribution model paired with state space realization to capture the internal water column dynamics of the WEC and estimate pneumatic power generation. Published experimental results of floating moored structures are then used to validate FlOWCITSS. While FlOWCITSS seemed to capture the period and general nature of the heave, surge, and internal water column dynamics, the magnitude of the response sometimes had errors ranging from 1.5% −37%. This error could be caused by the modeling techniques used, or it could be due to uncertainties in the experiments. The presence of smaller error values shows potential for FlOWCITSS to achieve consistently higher fidelity results as the code undergoes further developments. To demonstrate the use of FlOWCITSS, geometry variations of a Backward Bent Duct Buoy (BBDB) are explored for a wave environment and mooring configuration. The reference model from Sandia National Labs, RM6, performed significantly better than a BBDB with an altered stern geometry for a 3 second wave period, indicating that stern geometry can have a significant impact on pneumatic power performance. / Master of Science / Renewable energy is a critical component in combating climate change. Ocean wave energy is a source of renewable energy that can be converted into electricity using Wave Energy Converters (WECs). One such WEC is the floating Oscillating Water Column (OWC), which has been successfully field tested and warrants further exploration. Floating OWCs are partially submerged floating structures that have an internal chamber which water oscillates in. The motions of the water displace air inside this chamber, causing the air to be forced through a high speed turbine, which generates electricity. This research develops a publicly accessible code using MatLab and SimuLink to evaluate the motions and power generation capabilities of floating OWCs. This code is then validated against physical experiments to verify its effectiveness in predicting the device's motions. This publicly accessible code, known as the Floating OWC Iterative Time Series Solver (FlOWCITSS), showed error ranging from 1.5 % - 37% for the most important motions that are relevant to energy harvesting and power generation. These errors could be caused by the numerical models used, or uncertainties in experimental data. The presence of smaller error values shows potential for FlOWCITSS to achieve consistently higher fidelity results as the code undergoes further developments. To demonstrate the use of FlOWCITSS, geometry variations of floating OWCs are explored.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/101889 |
| Date | 13 January 2021 |
| Creators | Sparrer, Wendelle Faith |
| Contributors | Mechanical Engineering, Tarazaga, Pablo Alberto, Kurdila, Andrew J., Boren, Blake C. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0021 seconds