Slotted Waveguide Antenna Stiffened Structures (SWASS) offer a new way to integrate the antennas used by many aircraft systems in modern aircraft. Looking at the weather radars used by current aircraft and using the loading estimates of the X-47B from Northrop Grumman, the designs went through several stages in the optimization procedure. The first stage centered around accounting for the stress concentrations present at the corners of the slots. These points led to local failure around the slots prior to the buckling of the overall structure, but the development of a concentration factor curve fit accounted for these in the optimization procedure and filled in a gap in the current literature. The models are then optimized, exposing a weakness in that these stress concentrations would lead to failure well before buckling in most designs with a loaded copper insert. To avoid this and shift most of the load to the supporting material, an initial gap is implemented in the eigenvalue buckling analysis, thus allowing for the simple 1-D models to be rapidly optimized without the need for contact modelling upon the gap's closure. The waveguide designs are then analyzed to ensure that the optimization of the individual waveguides is not prioritizing the structural performance to the detriment of the electromagnetic performance. Multiple points along the optimized Pareto front are tested and showed that their electromagnetic performance was consistent across the various regions of the front, and that the desired frequency of 10 GHz used by weather radars was within the optimal operational range for the various designs. Continuing from the individual waveguides now to larger panels, high fidelity models were used to develop another curve fit that relates the buckling of a panel simply supported on all four sides to the buckling of a single constituent waveguide simply supported on both ends. This curve fit is then used to validate the larger panel's performance against anticipated flight loads, without the need to model entire panels during the optimization procedure. / Doctor of Philosophy / Modern aircraft utilize antennas for a variety of purpose, ranging from the weather radars in the nose of passenger airlines, to the communications antennas mounted on the exterior of military aircraft, and even the targeting radars used by weapons systems in modern military craft. However, these systems often require large empty spaces within the aircraft or interfere with the profile of the aircraft if mounted externally. Slotted Waveguide Antenna Stiffened Structures (SWASS) aims to eliminate these issues by integrating these antennas into the skin of the aircraft but uses the antennas themselves to help strengthen the structures, thereby eliminating the need to reroute the loads around them and making the aircraft lighter. These designs consist of a slotted metallic waveguide enclosed within supporting composite materials, which are substituted in place of the standard aircraft skin so as to fit seamlessly into the designs. Multiple issues can arise when attempting to do this, which this thesis tackles. To develop optimized, multifunctional designs the thesis balances the structural needs to integrate the designs into existing aircraft against the electromagnetic needs of the antenna systems it replaces. Gaps in the existing literature are addressed through the development of a curve fit to properly account for issues caused by the slots cut into the upper surface of the waveguides. New methods are also employed to simplify the optimization procedure. The first is reducing the load on the metallic waveguide through an initial gap by deriving a simplified model and eliminating the need for the complex models previously required. The next step is the creation of a new curve fit to relate the buckling of a single, less complex single waveguide model, to the buckling of the larger, more complex panel models. Throughout all of this, constraints and model validations are used to ensure that the designs meet their requirements, both as an antenna as well as a load bearing part of the aircraft's skin, specifically that of the X-47B.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/112312 |
| Date | 28 October 2022 |
| Creators | Brooks, Joseph Peyton |
| Contributors | Aerospace and Ocean Engineering, Canfield, Robert Arthur, Patil, Mayuresh J., D'Angelo, John, Seidel, Gary D., Kapania, Rakesh K. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Dissertation |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0034 seconds